Getting Started
Features
Motion Detect
Enables recording to start automatically when AmotionB is detected in the preset live image. You can also specify the detection area for each camera.
Automatic detection of network cameras
Reduces the hassle of complex camera registration procedures.
HDD expansion supported
Addition of up to 500 GB
RAID1 supported
Supports RAID1 if additional
Writing the same data to two separate hard disks (mirroring) to enable normal use if one of the hard disks breaks down.
Simultaneous recording up to 16 channels at 160 ips
Simultaneous recording up to 16 channels at 240 ips is possible when the NVR Viewer is not started up.
Display/Distribution performance at 80 ips is guaranteed
Enables simultaneous recording and playback
Playback of recorded images, jog dial playback and skip playback are possible while recording is in progress.
Direct Search
Enables you to retrieve data of a specific date/time or alarm position speedily.
Power failure recovery record
If a power failure occurs during recording, the system resumes recording in the mode selected before the power failure after recovery.
Alarm recording
Enables recording to start automatically in the alarm recording mode when alarm signal input is received during recording.
Alarm Mail Notification
Enables notification by
How to Read this Manual
There are two documents on this unit.
(1) Startup Guide
This is a booklet that is supplied together with VR- N1600U/E. It is also available in the PDF file format. You can find it in the
(2) Instruction Manual (PDF)
This manual is available in the PDF file format. You can find it in the
Symbols Used in this Manual
Note | Precautions to take during operation of this |
| unit. |
Memo | Details for reference, such as functions and |
| restrictions on uses. |
A | Page or item to refer to. |
|
Content of this Manual
●The copyright of this manual belongs to JVC. Reproduction or copy of this manual, in part or in whole, without the prior consent of JVC is strictly prohibited.
●Product names used in this manual are the trademarks or registered trademarks of the respective companies. Symbols such as , , and are omitted in this manual.
●Milestone and XProtect Enterprise are the registered trademarks of Milestone Systems, Inc.
●Designs, specifications and other details used in this manual may be modified for improvement without prior notice.
This STARTUP GUIDE deals only with the initial setup and basic operational procedures on the
For details, please refer to the
2