6 Enter the password for the network camera
10 Set the display rate of each camera such that
the total display rate of all cameras does not exceed 80 ips
●The default display rate is set to 8 ips. In other words, the maximum display capacity of 80 ips will be exceeded if 11 or more cameras are automatically detected. In this case, you will need to follow the steps below to adjust the display rate of each camera.
Note :
●Press the [KEY] button to display the software keyboard.
●Use the keypad to move the mouse cursor over the software keyboard.
●Pressing the [16/ENTER] button inputs the characters on the keyboard into the password field.
●The recording rate may drop if the total display rate of all cameras exceeds 80 ips.
A Press the [SKIP] to select the Device Manager ●The device at the top of the list is selected.
7 | After password entry is complete, press [KEY] |
|
| A |
|
| |||
8 | again the close the software keyboard |
|
| |
|
| |||
|
| |||
| pressing [16/ENTER] |
|
| |
9 | Repeat the steps from 5 to 7 for every detected |
|
| |
| camera |
|
| |
●The [Camera Record Setting] screen appears.
B Use the [2/D] and [10/0/E] buttons to select a device
B
14