Using the CD Player
To Unload a CD
Press the 0 button on the Unit to eject a CD. The CD is ejected automatically, then take out the CD.
(when the Unit is placed horizontally)
(when the Unit is placed vertically)
Basics of Using the CD Player
— Normal Play
To Play a CD
1Insert a CD.
2Press the 3¥8 button.
The first track of the CD begins playing.
Track number | Playback time |
•The CD Player automatically stops when the last track of the CD has finished playing.
To stop playing the CD, press the 7 button. The following information for the CD is displayed.
Total track number Total playback time
To stop playing and remove the CD, press the 0 but-
ton on the Unit.
To pause, press the 3¥8button. The playback time blinks on the display.
To cancel pause, press the same button again. Play con- tinues from the point where it was paused.
To Select a Track or Passage within a Track
In the stop mode or during playback, press the Number but- ton on the Remote Control to select the track you want.
•The selected track starts playing.
•For the track number more than 10, press the +10 button then the Number button.
OR
During playback, press the 4 or ¢ button to select the track you want.
•The selected track starts playing.
•Press the ¢ button once to skip to the beginning of the next track.
•Press the 4 button to skip to the beginning of the track being played. Press twice quickly to skip to the beginning of the previous track.
Search Play
Holding down the 4or ¢button, during playback, will fast forward/backwards the CD so you can quickly find a particular passage in the track you are listening to.
•The < or > and 
or 
buttons on the Remote Control operate same as the 4 or ¢ button does.
18
