Attaching a Ceiling Panel
Hooks
(2 locations)
Ceiling
Attach the ceiling panel (supplied) to the 2 hooks on the Ceiling Recessed Bracket.
Ceiling Panel
Camera
Removing a Ceiling Recessed Bracket
1. | Hooks | |
(2 locations) | ||
|
Ceiling Panel
3.
Stopper release lever
Stopper
Push
Upwards
2
Clamping screw
(3 locations)
1
Screw driver
1. Remove the Ceiling Panel.
Pull down the Ceiling Panel and disengage the 2 hooks either side.
2. Dismount the camera unit from the Ceiling Recessed Bracket.
To dismount, reverse the procedures for “Attaching the Cam- era” in the camera’s “INSTRUCTIONS” section.
3. Dismount the Ceiling Recessed Bracket from the ceiling.
1Loosen the clamping screws (3 locations) while support- ing the Ceiling Recessed Bracket. Upon ensuring that the clamping bracket has been dismounted from the ceiling, lower the Ceiling Recessed Bracket until the stopper comes into contact with the ceiling.
2To remove the stopper from the ceiling, push the stop- per release lever upwards using a screwdriver while sup- porting the Ceiling Recessed Bracket.
3Support the tilted Ceiling Recessed Bracket and remove it from the ceiling.
3
