JVC WR-MG88U Index, Inspect the main casing for scratches and cracks etc, Check the O-ring

Index Preparation

1 Inspect the main casing for scratches and cracks etc.

Apply 2 or 3 drops of the glass cleaner provided onto one of the lens tissues or a clean cloth, and wipe the inner side of the marine case front glass.

Strap

Front glass

Bottom view

!Main casing grip:

Attach the included strap as shown in the diagram above.

#Zoom lever $ Ring:

Commercially available fi lters (67mm diameter) etc can be attached.

% Buckles (4 places): Seal the marine case.

& Grip attachment holes:

You can attach the included grip, or commercially available weights etc.

( Still image shooting button

) Video recording start/stop button * Power/mode switch lever:

Turns camera’s power on/off, or switches video or still mode.

2 Check the O-ring.

Using the supplied pick, remove the O-ring from the main case.

Check the O-ring, O-ring contact surface, and groove in which the O-ring fits for dirt, scratches, or damage etc. visually and by touching with your fi nger.

3 Apply grease to the O-ring and re-attach.

4 Close the empty marine case (no camera inside).

5 Place the marine case in water, and check that there are no water leaks.

4