Power Supply Preparations
As a power supply source, you can use the rechargeable battery and/or
Using
1Insert the rechargeable battery into the unit.
Cut part |
Slide the cover and open it. | Insert the battery with its | Firmly close the cover. |
| minal facing you and its cut part |
|
| facing up. |
|
2To charge the rechargeable battery, connect the supplied AC adaptor.
To AC power outlet | AC adaptor |
English
3Press the 7/CHARGE button twice on the unit.
“CHARGE” appears on the display and charging starts. When charging is completed, “CHARGE” will disappear.
• “CHARGE” will appear for 5 seconds even when no
4Disconnect the AC adaptor.
Notes
•Recharging is not made if the unit is being used.
•It takes approximately 2 hours to recharge the rechargeable battery.
•Rechargeable battery has a service life of approximately 500
•The AC adaptor may become warm while recharging is in progress. This is not a malfunction.
•Before starting recording, fully charge the rechargeable battery. Otherwise, the unit may shut off during recording.
•Recharging with this unit shall be made at the temperature from +5°C to +35°C (41°F to 95°F). Otherwise, “HIGH TEMP” or “LOW TEMP” will appear on the display.
Using dry-cell batteries (not included)
1As explained below, open the battery cover of the battery case and insert three AA (LR6) alkaline batteries into the battery compartment.
2Turn the knob of the battery case in the direction as shown by the arrow until it stops.
(To detach the battery case, turn the knob toward in reverse until the battery case is re- moved.)
(Bottom View)
Note
To lengthen the battery life, you can use both rechargeable battery and the
Using the AC adaptor
Connect the supplied AC adaptor to the unit.
Refer to the connecting diagram in “Using
When the unit is turned off with a
cally starts. | 2 |
|