SYNCHRO Recording (SYNCHRO)
The synchro recording automatically starts when an input signal is given and ends if no signal condition contin- ues for 30 seconds.
1Insert an MD with its label side facing up.
2Set the REC MODE switch to SYNCHRO.
3Slide the REC button.
“SYNCHRO REC ON” appears and the “SYNC” indicator lights up on the display. Then, the disc mark blinks.
4Press the 6 button.
The “SYNC” indicator blinks, indicating that the unit enters Rec/Standby mode.
5Play the recording source.
When an input signal is detected by the unit, recording automatically starts.
The recording will automatically end if no signal condition continues for 30 seconds.
Note
Once the 6 button is pressed during the SYNCHRO recording, the unit enters Rec/Pause mode and the SYN- CHRO recording is disabled. To restart the SYNCHRO recording, repeat the above steps.
English
Editing the MD (Using the Unit)
In addition to its recording and play functions, the unit comes with editing functions. You can divide, join, move, or erase the recorded tracks in the MD as required. Also, you can give a disc title to the MD and track titles to the tracks in the MD.
Note that you cannot edit the MD in Random Play mode.
Dividing tracks (DIVIDE function)
This involves adding a track mark (see Note) at some point during the track which is to be made into the start of an additional track so that the original track is di-
Erasing tracks (ERASE function)
This enables unnecessary tracks. Narration, etc. to be erased speedily. The erased parts do not remain as si- lences but are closed up by the subsequent tracks.
vided into two tracks.
Track No.
| Track No. |
Erasing | Track A Track B Track C Track D |
DIVIDE | Track A | Track B | Track C | Track D |
|
|
|
| |
|
|
|
| |
|
|
|
|
|
| Track A | Track B | Track C | Track D |
|
|
|
|
|
|
|
|
|
|
Joining tracks (JOIN function)
This involves erasing a track mark and turning two ad- joining tracks into one track.
Track No.
Track A Track B Track C Track D
JOIN
Track B |
|
| ||
|
|
|
|
|
| Track A | Track C | Track D | New tracks can |
| be recorded. | |||
|
|
|
|
|
|
|
|
|
|
Erasing all the tracks (ALL ERASE function)
All the tracks can be erased at once without recording fresh material over them.
| Track No. |
ALL | Track A Track B Track C Track D |
ERASE |
|
Track A + Track B Track C Track D | New tracks can be recorded. |
|
Moving tracks (MOVE function)
Tracks can be moved around so that they are in the de- sired sequence.
Track No.
MOVE | Track A | Track B | Track C | Track D |
|
|
|
| |
|
|
|
| |
|
|
|
|
|
| Track A | Track C | Track D | Track B |
|
|
|
|
|
Giving titles to discs and tracks (TITLE function)
A title consisting of up to 64 characters can be given to a disc and a track. The title given appears in the display window.
Note |
|
Track marks: These marks are provided to locate the start of each track. Whatever lies between one track mark and |
|
the next is considered to a track and the numbers of the tracks (called “track numbers”) are displayed in the sequence | 8 |
in which they are to be played. |
