JVC XV-K505GD, XV-K503TN manual Connections, Before making any connections, Yellow Video, Red

XV-K505GD/XV-K503TN

LET0143-001A

[3U, 4U, US, UB, UT] (EN)

Getting started

Connections

Before using the unit, you have to connect the unit to a TV or amplifier. By connecting to an amplifier which has a digital terminal or Dolby digital capability, you can enhance the sound quality.

Before making any connections

•Do not connect the AC power cord until all other connections have been made.

•Since different components often have different terminal names, carefully read the instructions supplied with the component you wish to connect.

To connect to a TV, monitor, or projector with the audio input and video input jacks

You can enjoy using the unit by simply connecting it to a television set. To hear improved audio sound quality, connect the audio outputs to your audio equipment. (See the following pages.)

The unit

	VIDEO OUT
VIDEO	S-VIDEO	AV COMPU LINK
	NTSC
	PAL
	AUDIO OUT
	LEFT	PCM/STREAM
OFF	ON	OPTICAL
	RIGHT
ATTENUATOR		DIGITAL OUT

Yellow White

Red

Audio/video cable (supplied)

*If the TV has an AV COMPU LINK terminal, see "AV COMPU LINK remote control system" on page 98.

S-video cable (supplied)

TV, monitor, or projector

IN

S-VIDEO

Yellow VIDEO

Red	RIGHT
	AUDIO
	LEFT

White

Connect the unit to a television set equipped with stereo audio input and video input jacks using the supplied audio/ video cables.

•If your television set has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo audio output to monaural.

•If your television set has an S-video input, you should connect it with the S-VIDEO output of the unit using the supplied S-video cable in addition to the (standard) video connection to get better picture quality.

NTSC

The unit is compatible with the PAL and NTSC color systems. Set PAL according to the color system of your TV, monitor, or projector. (Make sure the color system of the DVD disc labeled of the package. If you play the disc recorded on the different color system, the unit play it incorrectly. Use the disc recorded of the same color system.) When you use the multi-system TV, monitor, or projector, you can play the disc recorded on both the PAL and NTSC color systems. Set NTSCPAL according or the color system of the disc.

ON OFF

The ATTENUATOR beside the AUDIO OUT jacks should be normally set to OFF. If you hear the audio distorted because the

sensitivity of the TV’s audio input is too high, set ON OFF to ON.

ATTENUATOR

NOTE

¦Connect VIDEO OUT of the unit to the video input of a television set. Connecting VIDEO OUT of the unit to a TV via a VCR may cause a monitor problem when playing back a copy-protected disc.

16