Basic operations
To resume playback
When the resume mode is “ON”
While the disc you interrupted playback is still on the disc tray, press 3.
The player resumes playback from the position where playback was interrupted.The TV screen shows “RESUME PLAY.”
During playback, press ¡ or 1 on the remote control unit.
You can select from 2 times (1.5 times for only the forward playback of DVD VIDEO), 5 times, 20 times and 60 times (for DVD VIDEO only) normal speed. Pressing 3 returns the player to normal playback.
During playback, hold down ¢ or 4.
Playback is advanced or reversed at 5 times normal speed.
NOTE
To play back from the beginning
Press 7 before pressing 3 to start playback.
When the resume mode is “DISC RESUME”
1 Press 0 to insert a disc for which the player has stored an interrupted position.
The TV screen shows “RESUME STOP.”
2 Press 3.
The TV screen shows “RESUME PLAY” and the player resumes playback from the position where playback was interrupted.
To play back from the beginning
After inserting the disc, press 7 before pressing 3 to start playback.
NOTES 
•If you change the [RESUME] setting from [DISC RESUME] to [OFF] or [ON], you cannot resume playback of a disc whose “resuming” position is stored. However, when you again set [RESUME] to [DISC RESUME], you will then be able to resume playback of the disc.
•When you resume playback, set the [RESUME] setting to [DISC RESUME] before removing a loaded disc.
•If you interrupt the playback of a disc for which an interrupted position has already been stored, the memory will be updated with the new interrupted position.
•For a
•When the player memorizes an interrupted point for a disc, it also memorizes Audio, Subtitle and Angle settings.
•The player may not resume playback exactly from the interrupted point. In the case of an SVCD/Video CD disc with PBC function, the player may resume playback from a point slightly earlier or later than the point where playback was interrupted.
•When you change Video CD playback mode to program or random play, the memory of the interrupted position goes off, then the player cannot resume playback.
•Pressing DVD/CARD cancels the memory of the interrupted position of the playback.
Various speed playback
To advance or reverse playback rapidly while monitoring
During rapid playback, the sound will be muted except when playing an Audio CD, and when playing a DVD VIDEO at 1.5 times normal speed. For Audio CD discs, the sound will be heard intermittently.
x1.5 Quick Playback with sound
When you select 1.5 times normal speed playback, the disc is played back with sound.
•The subtitle does not go off.
•The sound may be heard intermittently.
•If the sound of a DVD VIDEO disc is recorded in Dolby Digital or DTS format, stereo linear PCM signals are output. With some DVD VIDEO discs, the sound quality and volume may alter, or the sound may be out of tune.
•To switch from rapid reverse playback to x1.5 Quick Playback, first press 3, then press ¡ once.
To advance a still picture frame by frame
While paused, press 8.
Each time you press 8, the still picture advances to the next frame.
Pressing 3 returns to normal playback.
To play back in slow motion
You can select from 1/32 times, 1/16 times, 1/4 times and 1/2 times normal speed.
During playback, press 8, then press ¡ (to play forward slow motion), or 1 (to play reverse slow motion, for DVD VIDEO disc only).
Pressing 3 returns to normal playback.
NOTE
During slow motion playback, the sound will be muted.
Basic | operations |
|
|
11
