JVC XV-S60 manual Audio and system preference

Initial settings

PROGRESSIVE MODE

You can select the progressive mode from the following options.

PREFERENCE1 PREFERENCE2

MENU LANGUAGE		ENGLISH
AUDIO LANGUAGE		ENGLISH
SUBTITLE		OFF
ON SCREEN LANGUAGE		ENGLISH
ON SCREEN GUIDE		ON
MONITOR TYPE		4:3 LB
PROGRESSIVE MODE		AUTO
SELECT	KEY

•	STREAM/PCM
	Should be selected when you connect to the digital
	input of an amplifier to a built-in DTS, Dolby Digital, or
	MPEG multichannel decoder.
•	DOLBY DIGITAL/PCM
	Should be selected when you connect to the digital
	input of a Dolby Digital decoder, or an amplifier with a
	built-in Dolby Digital decoder.

Initial settings

•AUTO

The unit recognizes the picture type (film or video source) of the current disc according to the disc information.

•VIDEO 1

Suitable for playing back a video source disc with static (inactive) pictures.

•VIDEO 2

Suitable for playing back a video source disc with dynamic (active) pictures.

•FILM

Suitable for playing back a film or progressive source disc.

•SMART

Used to playback a disc containing both video and film source materials. The unit recognizes the picture type according to the current data.

*Normally, set the PROGRESSIVE MODE to “AUTO”.

*Some DVD discs may not be played back correctly with the “AUTO” mode. If the playback picture is unclear or noisy with a particular DVD Video disc, try to change the mode.

NOTE

•When playing back a film-source DVD Video disc with the “PROGRESSIVE MODE” set to “FILM”, “SMART” or “AUTO” and the progressive scan made is active,the PROGRESSIVE indicator on the front panel lights. (See page 15.)

Audio and system preference

The “PREFERENCE 2” display handles preferences related to audio and system.

DIGITAL AUDIO OUTPUT
To connect the unit’s digital
output to an external device	PREFERENCE1	PREFERENCE2
equipped with a digital	DIGITAL AUDIO OUTPUT		STREAM/PCM
	DOWN MIX		Lo/Ro
input, this item must be set	COMPRESSION		ON
	AUTO STANDBY		OFF
correctly.	SCREEN SAVER		MODE 1
	AV COMPULINK MODE		DVD 1
	SELECT	KEY

•PCM ONLY

Should be selected when you connect the DIGITAL OUT jack of the unit to the linear PCM digital input of other audio equipment.

The following chart shows the relationship between types of playback discs and output signals.

	Output
Playback discs	STREAM/	DOLBY
		DIGITAL/	PCM ONLY
	PCM
		PCM
DVD with 48 kHz,	48 kHz,16 bit,
16 bit linear PCM	stereo linear	+	+
	PCM
DVD with 48 kHz,	48/44.1 kHz,
20/24 bit linear	16 bit, stereo	+	+
PCM	linear PCM*
DVD with 96 kHz,	48 kHz, 16 bit,
linear PCM	stereo linear	+	+
	PCM*
DVD with DTS	DTS bitstream	48 kHz, 16 bit,
		stereo linear	+
		PCM*
DVD with Dolby	Dolby Digital		48 kHz, 16 bit,
Digital	bitstream	+	stereo linear
			PCM*
DVD with MPEG	MPEG	48 kHz, 16 bit,
multichannel	bitstream	stereo linear	+
		PCM
Video CD	44.1 kHz,
	16 bit, stereo	+	+
	linear PCM
Audio CD	44.1 kHz,16
	bit,	+	+
	stereo linear
	PCM
Audio CD with DTS	DTS bitstream	44.1 kHz,
		16 bit, stereo	+
		linear PCM
CD -R/RW with	No output	+	+
MP3

*With some DVD VIDEO discs that are not fully copy- protected, a 20 or 24 bit digital signal may be output.

NOTES

•The unit does not provide the DTS decoding function.

•When playing a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers.

46