Connections

Do not connect the power cord until all other connections have been made.

Connecting the FM and AM (MW) antennas

If reception is poor

Center unit

AM (MW) loop antenna

7AM (MW) loop antenna

Setting up supplied AM (MW) loop antenna

Outdoor single vinyl-covered wire antenna (not supplied)

If the antenna cord is covered with the insulation coat, twist and pull the insulation coat off and remove.

7FM antenna

Center unit

FM antenna (supplied)

Connecting AM (MW) loop antenna

1

Center unit

2

Antenna cord

3

Extend the supplied FM antenna horizontally.

If reception is poor

Center unit

 

Outdoor FM antenna

 

(not supplied)

Standard type (75 C

Outdoor FM antenna cord

coaxial) connector

(not supplied)

 

NOTE

•We recommend that you use coaxial cable for the FM antenna as it is well-shielded against interference.

•Turn the loop antenna until you have the best reception during AM (MW) broadcast program reception.

NOTE

•Make sure the antenna conductors do not touch any other terminals, connecting cords and power cords. This could cause poor reception.

8