Basic operations

The buttons on the remote control are used to explain most of the operations in this manual. You can use the buttons on the center unit same as on the remote control for operations unless otherwise noted.

IMPORTANT

Before using the remote control for the following operation;

• Set the remote control mode selector to AUDIO.

The buttons described below are used on pages 14 to 17.

FAUDIO

MUTING

DVD FM/AM AUX TV SOUND

Source

 

selecting

 

buttons

 

AUDIO VOL

 

AUDIO

Remote control

 

 

mode selector

CursorENTER

(3/2/Y/5)/

ENTER

SCAN MODE

TREBLE

SMART

SLEEP DIMMER S.SETUP

S.WFR CENTER L-SURR.-R

STANDBY

SD/MMC

VOLUME

PHONES

Turning the system on/offOn the remote control:Press FAUDIO.On the center unit:Press F.

When DVD is selected as the source (A pg. 15), the following messages will appear on the TV screen.

“OPEN”/“CLOSE”:

Appears when opening or closing the disc tray.

“NOW READING”:

Appears when the system is reading the disc information.

“REGION CODE ERROR!”:

Appears when the Region Code of the DVD VIDEO does not match the code the system supports. The disc cannot be played back.

“NO DISC”:

Appears when no disc is loaded.

“CANNOT PLAY THIS DISC”: Appears when unplayable disc is loaded.

NOTE

The STANDBY lamp turns on when the power is turned off and turns off when the power is turned on.

The power supply to the subwoofer is linked to the center unit. The POWER ON lamp on the subwoofer lights green when the power is turned on.

A small amount of the power is consumed even when the power is turned off (center unit only). This is called standby mode and the STANDBY lamp lights in this mode. Unplug the power cord from the AC outlet to turn the power off completely.

You can also turn on the system by pressing the following buttons;

OPEN/CLOSE on the remote control or 0on the center unit

One of the source selecting buttons on the remote control

3on the center unit. You can use the same buttons on the remote control except after pressing FM/AM.

14