Playback
See page 18 for button locations.
A TV screen may burn out if a static picture is displayed for a long time. To prevent this, the system automatically dims the screen if a static picture is displayed for over 5 minutes (the screen saver function).
•Pressing any button will cancel the screen saver function.
•If you do not want to use the screen saver function, see page 35.
One Touch ReplayYou can move back the playback position by 10 seconds from the current position.
7During playback
On the remote control:
Press .
NOTE
•This function works in the same title.
•This feature may not work for some discs.
7 During playback
On the remote control:
Press yor 1.Each time you press the button, the search speed changes (M2, M5, M10, M20, M60).
To return to normal speed playbackPress 3(play button).
Press and hold xor 4.Continuously pressing xor 4increases the
NOTE
•The operation with xor 4above is available for a disc other than MPEG4 disc.
•When a DVD VIDEO, VCD, SVCD, or MPEG4 disc is played back, no sound comes out during
•When a DVD AUDIO or CD is played back, sound is intermittent and low during
•This feature may not work for some discs.
7For DVD VIDEO (chapter):
During playback For VCD/SVCD (track):
During playback without PBC function
For DVD AUDIO/CD/MP3/WMA/JPEG/MPEG4 (track/file): During playback or while stopped
Press xor 4repeatedly.NOTE
•When playing back an MP3/JPEG disc, you can make operations using the file control display. (A pg. 26)
•This feature may not work for some discs.
7Using number buttons on the remote control7For DVD VIDEO (title, chapter):
While stopped, the title number is selected.
During playback, the chapter number is selected.
For DVD AUDIO (track):
During playback or while stopped
For VCD/SVCD (track):
During playback without PBC function
For CD/MP3/WMA/JPEG/MPEG4 (track/file):
During playback or while stopped
Press number buttons•For details on using the number buttons, see “How to use the number buttons” below.
How to use the number buttonsTo select 3: | Press 3. |
To select 14: | Press +10, then 4. |
To select 24: | Press +10 twice, then 4. |
To select 40: | Press +10 three times, then 10. |
| Or press +10 four times, then 0. |
20