4 EN
GETTING STARTED

Power

This camcorder’s 3-way power supply system lets you
choose the most appropriate source of power.
NOTES:
●
No function is available without power supply.
●
Use only specified power supply.
●
Do not use provided power supply units with other equipment.
CHARGING THE BATTERY PACK

SUPPLY POWER

1
Connect the charger’s AC power cord to a wall
outlet. The power indicator lights.

ATTACH BATTERY PACK

2
Align the marks and slide the battery pack in the
direction of the arrow until it locks in place.
The CHG. indicator lights.

DETACH BATTERY PACK

3
When charging is completed, the END indicator
lights. Slide the battery pack opposite the direction
of the arrow.
USING THE BATTERY PACK

ATTACH BATTERY PACK

1
Hook its top end to the camcorder and push the
battery pack in until it locks in place.

DETACH BATTERY PACK

2
Slide BATT. RELEASE and pull out the battery pack.
( ): When the Video Light is on
**REFRESH
The AC power adapter features a REFRESH function that allows
you to fully discharge the battery pack before recharging.
To discharge the battery . . .
..... attach the battery pack to the adapter as shown in the
illustration to the left. Then push REFRESH. The REFRESH
indicator lights when discharging starts, and goes out when
discharging is complete.
BATT. PACK RECORDING TIME
BN-V12U approx. 1 hr. 5 min.(40 min.)
BN-V22U approx. 2 hrs. 15 min. (1 hr. 25 min.)
BN-V25U approx. 3 hrs. (1 hr. 50 min.)
BATT. PACK CHARGE DISCHARGE
BN-V12U approx. 1 hr. 10 min. approx. 3 hrs. 30 min.
BN-V22U approx. 2 hrs. 10 min. approx. 7 hrs.
BN-V25U approx. 2 hrs. 40 min. approx. 10 hrs.
REFRESH indicatorREFRESH switch
CHG. (charge) indicator
To AC outlet
Marks
END
indicator
POWER
indicator

ATTENTION:

Before detaching the power source,
make sure that the camcorder’s power
is turned off. Failure to do so can result
in a camcorder malfunction.
Push in.
BATT. RELEASE
Hook on.