Jwin i903 Charging the Headset and Audio Transmitter, Using your Computer’s USB port to Charge

Noise-Canceling Headset w/ Bluetooth wireless technology V10M10_IM_EN_12072006

GETTING STARTED

Charging the Headset and Audio Transmitter

Before the first use of this headset, it is recommended to fully charge the headset and the included audio transmitter (dongle). To do so, follow the instructions below:

1.Locate the mini USB port (on the bottom of the right headphone, or top right on the dongle) before attaching USB cable.

Mini USB port

2.Attach other end of cable to supplied USB power adapter.

3.Plug the supplied USB power adapter to an AC outlet.

4.Plug the other end to the USB connector on the headset or dongle. The red light will be on when connected. When the headset/dongle is fully charged, the red light will go off.

5.Unplug the USB adapter when the headset/dongle is fully charged.

Using your Computer’s USB port to Charge

If your computer has a USB port, you can also charge the headset or dongle your computer.

1.Follow the directions above for connecting the USB cable to the headset or dongle.

2.Connect the USB cable into the USB plug on a computer.

3.Unplug when fully charged.

Notes on charging

•Use the only the included power adapter to charge the headset.

•The built-in rechargeable battery should be charged at least once every two months.

•Headset cannot be used while charging.

Important: If your unit displays red flash and you hear long beep sound while operating, this indicates low battery condition, so please charge the unit before operating again.

- 9 - www.i-Luv.com