V10M10_IM_EN_12072006 |
OPERATING INSTRUCTIONS
Pairing i903 with your Mobile Phone or Audio
Device – Continued
6.Enter the password: “0000.” The phone or device will display a confirmation message after a few seconds. Once the headset is correctly paired, the light will stop blinking red and blue alternately, and will blink blue only.
7.Repeat this procedure each time an additional phone or audio device needs to be paired with the i903.
8.Enjoy music and answer calls wirelessly using the i903.
Notes on Pairing
•Be aware that in order to answer and place calls while listening to music, the i903 must be paired with a mobile phone BEFORE it is paired with audio devices or the audio adapter.
•This headset will not be recognized by your mobile phone unless it is properly paired. The i903 cannot pair with mobile phones which are not designed with Bluetooth wireless technology. It is important to follow both these instructions and those which accompany the corresponding mobile phone or audio device.
•The i903 can also be paired with a computer which supports Bluetooth wireless technology. For pairing instructions for such a computer, consult the owner’s manual for the computer or see a computer specialist.
•The i903 is designed to remember pairing information even when it is turned off. However, this feature only works if the corresponding mobile phone is designed with the same feature. Consult the owner’s manual of the mobile phone or audio device for these design features.
•The i903 can only be paired with two devices at the same time; one with the mobile phone and the other with an audio device or the supplied wireless audio transmitter. Attempting to pair the i903 with a third device will result in the loss of the previous pairing connection.
- 14 - |
