V10M10_IM_EN_12072006 |
OPERATING INSTRUCTIONS
Pairing i903 with the Included Wireless Audio Transmitter (Dongle)
The i903 can be used with an audio device that is not designed to support Bluetooth wireless technology using the supplied wireless audio transmitter (dongle). In order to answer and place phone calls while using the dongle, it is important to pair the mobile phone first. After pairing the mobile phone according to the
1.To set the i903 into pairing mode, make sure to turn on the switch located on the left ear piece. Then press and hold the
2.Press and hold the On/Off button on the dongle for approximately five (5) seconds.
3.Both i903 and Dongle will display flashing Blue and red lights, indicating that both are in pairing mode.
4.Place the headset near the dongle when both are in pairing mode.
5.When the alternating red and blue blinking lights on both devices change to a blue blinking light ONLY, pairing is complete.
6.Plug the 3.5mm end of the dongle into the headphone jack of an audio device and enjoy music playback wirelessly through the i903 stereo headphones.
Note: Only the volume can be controlled on the i903 when using the dongle. All other functions (skip, stop, forward, etc.) must be controlled using the controls on the audio device itself.
- 12 - |
