Vintage Design Telephone with Caller ID

V10M10_IM_EN_01282008

OPERATIONAL INSTRUCTIONS

Dialing IP Number

-When the IP was set as ‘On’, pick the handset and if press the first digit is long distant code, then it will run by IP format automatically or

-Under off-hook state, when reviewing the incoming and outgoing call, if the first digit of displaying number is long distant code, press the SET/BACK button, then it will run by IP format after hook the phone once.

-Under on-hook state, when reviewing the incoming and outgoing call, if the first digit of displaying number is long distant code, press the SET/BACK button and it will run by IP format automatically.

Storing 2 One-Touch Dialing Memories

-Under the on-hook state, press the STORE button.

-The LCD will display “PLS INPUT NUMBER”. Enter the desired number by using keypad

-Press M1 or M2.

Storing 2 One-Touch Dialing Memories from Incoming Calls

-During the incoming call, press the STORE button.

-The LCD will display “PLS INPUT NUMBER”. Press M1 or M2 to store the incoming number.

Dialing From One-Touch Memories

-Under off-hook state, press the desired one-touch button (M1/M2)

-Press the SET/BACK button and the number will be dialed out automatically.

-Under off-hook state, press the desired one-touch button (M1/M2) and the number will be dialed out automatically.

Deleting a One-Touch Memory Number

-Under off-hook state, press M1/M2 and it will show the stored number.

-Press the DEL button twice to erase the number and the LCD will display “NO CODE”

Storing 10 Two-Touch Dialing Memories

-Under the off-hook state, press the STORE button.

-The LCD will display “PLS INPUT NUMBER”. Enter the desired number by using keypad

-Press the STORE button again and the LCD display “INPUT ADDR”

-Press the desired two-touch location from 0-9.

Storing 10 Two-Touch Memories from Incoming Calls

-During the incoming call, press the STORE button.

-The LCD will display “PLS INPUT NUMBER”. Press STORE button again

-Then the LCD will display “PLS INPUT ADDR”, press the desired two- touch location from 0-9

- 14 -

www.jWIN.com

Page 15
Image 15
Jwin JT-P433 instruction manual Dialing IP Number, Storing 2 One-Touch Dialing Memories, Dialing From One-Touch Memories