Vintage Design Telephone with Caller ID | V10M10_IM_EN_01282008 |
OPERATIONAL INSTRUCTIONS
Basic Setup
Note: Please be sure the telephone lines are connected well and batteries or AC adapter are installed before starting setting. Press the SET/BACK button to enter the setting menu, use ▲UP or ▼DOWN buttons to select from the menu including Set
Language, Set Local Area Code, Set Time/Date and LCD Contrast. Press the FLASH button to exit the setting manual.
A.SET LANGUAGE
-When the LCD displays “SET LANGUAGE”, press the SET/BACK button to enter.
-Use the ▲UP or ▼DOWN buttons to select the desired language (English, French, Spanish, Turkish).
-Press the SET/BACK button to confirm.
B.LCD CONTRAST
-When the LCD displays “LCD CONTRAST”, press the SET/BACK button to enter.
-Press the ▲UP or ▼DOWN buttons to select the desired contrast level from 1 to 4.
-Press the SET/BACK button to confirm.
C.SET DATE/TIME
-When the LCD displays “SET DATE/TIME”, press the SET/BACK button to enter.
-Press the ▲UP or ▼DOWN buttons to set the present year.
-Press the SET/BACK button to confirm the year.
-Use the same method to set month ,day, hour and minute
D.SET LOCAL AREA CODE
-When the LCD displays “LOCAL AREA CODE”, press the SET/BACK button to enter.
-Press the ▲UP or ▼DOWN buttons to select the first digit of area code.
-Press the SET/BACK button to confirm the first digit.
-Use the same method to set the rest of the digits
E.SET LONG DISTANCE CODE
-When the LCD displays “LONG PREFIX”, press the SET/BACK button to enter
-Press ▲UP or ▼DOWN to select the code
-Press the SET/BACK button to confirm the code
F.SET IP NUMBER (SSN=SPECIAL SERVICE NUMBER)
Note: The Special Service Number (SSN) is a sequence of digits that can be stored in your telephone and used to gain access to certain features of a telephone network prior to dialing an actual phone number. Unless you are completely familiar with the use of an SSN sequence, it is best to skip this feature.
-When the LCD displays “SET SSN”, press the SET/BACK button to enter
-Press ▲UP or ▼DOWN to select the first digit
-Press the SET/BACK button to confirm the first digit
-Use the same method to set the rest of the digits
- 8 - | www.jWIN.com |
