Stopping play
*Press STOP if you wish to stop play. The disc and track number which can be played will now appear in the display.
*Press PUSH OPEN on the unit to remove the CD.
PROGRAMMING
By programming the CD player, you can play up to 20 tracks in any desired order. (possible only when the CD is in stop mode.)
*Place the disc to be programmed in the tray. Press MEMORY button.
*The display will show MEMORY TRACK and
*Use SKIP FORWARD or BACKWARD button to select the first track to be programmed.
*When the desired track appears on the display, press MEMORY button again.
*The display will show MEMORY TRACK and
*Repeat this procedure to select other tracks that you wish to program from the disc into the memory.
*In the radio MODE, when frequency is displayed, this key is use for setting of memory writing enable state for 5 second.
Playing a program
*Press PLAY/PAUSE.
*Play starts with the first track of the program.
*When all track have been played, the display shows the number of tracks and the playing time of the CD song.
Erasing a program
A program is erased if you :
Press PROGRAM then STOP/CLEAR button in stop mode. Or Switch the unit OFF. Or Opening the CD door.
Note : In setting a new program, the existing one will be cleared.
RANDOM PLAYING (for Remote Handset)
*Press the RANDOM button once, and the RANDOM^indicator will light up.
*Press PLAY/PAUSE button to start playing. The tracks will be played randomly.
*Press STOP button to clear the random mode.
Listening to radio
*Select the FUNCTION switch into RADIO function
*The display will appear FM waveband
*Select the desired waveband range with the BAND button. (Either AM or FM)
*Using TUNING UP/DOWN button to select your desired station.
Automatic tuning
*Press TUNING UP/DOWN for a second or more, then release the button. The tuner will automatically for the first station of sufficient signal strength.
*Press above procedure if you wish to select another station.
