Manual tuning
*To tune to weak stations, use manual tuning by pressing TUNING UP/DOWN button continuously until you read the correct frequency or the reception is at its best.
*When the STEREO appear on the display, you are receiving a FM stereo transmission. (FUNCTION switch must be at RADIO/FM ST. position.)
STORING STATION
1.30 stations can be stored in memory, you can tune in the stored station directly by pressing
2.Set the FUNCTION switch to RADIO function
3.Select your desired band.
4.Tune in the desired station.
5.Press MEMORY button, LCD display “MEMORY”.
6.Select location number 1 to 30 of preset station by pressing the
7.Repeat above steps 2 to 5 for each station stored.
8.By listening back the Preset Station, Press
Note :
1.You can not erase a previously stored station, but storing a new station will exchange the previous one.
2.If no power supplied, then stored station are erased. Please store station again.
Cassette deck
Inserting a cassette
*Press STOP/EJECT button on deck, the cassette door opens.
*Insert a cassette tape into the compartment with the open side downwards and the full spool on the left.
*Close the cassette door.
Recording from other sound sources
*Press TUNER/CD to select the sound source.
*Place a cassette tape in DECK.
*Press RECORD, in doing so, PLAY is pressed too, to start the recording. When the tape has reached its end, the tape stops.
*To interrupt a recording, press PAUSE.
*To continue recording, press PAUSE again.
*Press STOP/EJECT if you want to stop the recording before the end of the tape.
Playback of cassette
*Set the unit to TAPE mode by sliding the FUNCTION Switch. TAPE will appear on the display.
*Place the cassette tape in deck.
*Press PLAY on the unit to start playback. Playback stops when the tape reaches the end.
*For brief interruptions, press PAUSE on the unit to continue playback, press PAUSE again.
*Press STOP/EJECT if you want to stop playback the end of the tape.
Winding the tape
*Press F.F to
*Press REW to
*Press STOP/EJECT to stop
