Jwin JX-CD4000 Listening To Compact Disc Cd, Amplifier, Loading the disc, Playing the entire disc

Models: JX-CD4000

1 10
Download 10 pages 57.03 Kb
Page 7
Image 7
Amplifier

Amplifier

*Press POWER button to switch the unit on.

*Required sound source (CD, Radio or Tape) can be selected by sliding the function switch to desired location. The corresponding display will light up.

*Adjust the volume with the VOLUME UP/DOWN button.

*Set the tone with built in present equalizer (normal, classic, rock or pop) with the Preset EQ button. (for Remote Control optional)

*Press POWER button to switch off the unit.

LISTENING TO COMPACT DISC (CD)

The LCD indicator always shown the tracks of a disc or program which are still to be played. It works in all modes, in stop modes, all tracks of the disc or the program are shown.

Loading the disc

*Press FUNCTION switch to select CD mode.

*Press PUSH OPEN button to open the CD door, display will show ) 0:0" load the CD with printed side facing up.

*Close the CD door, the CD-player starts and scans the contents list of CD.

After a few seconds, the total playing time and the number of tracks appear on the display.

Playing the entire disc

*Playback will start by pressing PLAY/PAUSE, the indicator then appears. Playback starts with the first track.

The display shown the current track number and its elapsed time.

*To interrupt playback, press PLAY/PAUSE. The time elapse indicator will flash.

*To resume playback, press PLAY/BACK again.

*To stop playback, press STOP.

SELECTION A DIFFERENT TRACK DURING PLAY

*Press SKIP FORWARD /BACKWARD button on the unit (or remote), the required track number appears in the display.

*Press PLAY/PAUSE button to starting playing.

Starting again with the track that is currently playing

*Press SKIP BACKWARD once.

*The track will be started again from the beginning.

Repeat play

*During play, press REPEAT button on the remote control. The “REPEAT” indicator lights up. The entire disc is played and then repeated.

*Press REPEAT again, REPEAT will flash on the display. Current track in the disc is played and then repeated.

*Press REPEAT three times, to stop the repeat function. The repeat indicator light goes out. Play continues as normal.

*In the radio MODE, the preset memory is called in order

UK-4

Page 7
Image 7
Jwin JX-CD4000 manual Listening To Compact Disc Cd, Amplifier, Loading the disc, Playing the entire disc, Repeat play