Portable AM/FM Radio and CD Player | V10M10_IM_EN_12262006 |
OPERATIONAL INSTRUCTIONS
Program Mode – Continued
4.Press the PROGRAM BUTTON to store the MP3 file number in memory.
5.Repeat above procedure (from step 2 to step 4) until all desired MP3 files have been programmed.
Note: Whenever the FOLDER BUTTON is pressed, it will always show the last programmed album number first to recall your memory. The total of 20 tracks can be stored in memory. After complete programming, LCD DISPLAY will show “PROGRAM – –
6.To start the programmed playback, press the PLAY/PAUSE BUTTON (X) once. The play “X” indication, “PROGRAM” indication and the MP3 file number of the specific album will be shown on the LCD.
Example: Album # 3, Track # 2.
Press the FOLDER
BUTTON to read the
ALBUM number.
7.To check the program you have stored after complete programming:
a.Press the PROGRAM BUTTON once during the stop mode. The LCD DISPLAY will show “P01” and blink continuously.
b.Press the FOLDER BUTTON to read the folder (or album) number, and then press
the SKIP/SEARCH FORWARD ( ) or BACKWARD ( ) BUTTON once. The LCD DISPLAY will show the stored MP3 file number of said folder (or album).
c.Press the PROGRAM BUTTON again. The LCD DISPLAY will show “P02” and blink continuously.
d.Repeat above procedure (from step b to step c) to check all programs being stored.
8.To cancel the programmed memory:
a.During the stop mode, press the STOP BUTTON () once, or
b.Open the CD Door during the stop mode.
The “PROGRAM” Indication will disappear from the LCD DISPLAY.
To Stop the Playback
1.Press the STOP BUTTON () once when the MP3 disc is in either the play or pause mode to stop the MP3 disc.
2.To turn off the unit, slide the FUNCTION SWITCH to the “OFF” position.
- 10 -www.jWIN.com
