AM/FM/Weather band Radio w/ Dual Alarm Clock | V10M10_IM_EN_06022009 |
OPERATIONAL INSTRUCTIONS
To Turn the Alert ON / OFF
1.To turn the alert on and off, press and hold the ALERT ON / OFF button for five (5) seconds in power off state until “ALERT ON” blinks on the screen.
2.Press the UP "" or DOWN "" buttons to switch between “ALERTON” and “ALERTOFF”.
3.Press the SELECT button to save your selection.
Setting the Alert Volume
1.To set the alert volume, press the MENU button.
2.Press the UP "" or DOWN "" button until “SIREN LEVEL” is displayed.
3.Press the SELECT button and “HIGH” or “LOW” will start blinking.
4.Then press the UP "" or DOWN "" buttons to choose “HIGH” or “LOW” volume.
5.Press the SELECT button to save your setting.
Selectable Alert Option
The receiver can be programmed to only sound the voice or siren alert for select weather emergency messages. Those messages unimportant to you can be programmed to only display a message, minimizing annoyance.
To program the emergency messages you want to silence, follow these steps:
a.Press the MENU button to open menu options.
b.Press the UP "" or DOWN "" button until
c.Using the UP "" or DOWN "" buttons, scroll through the different alerts you want to silence.
d.After making your selection, press the RIGHT “>” button to change the status of the event from “ENABLE” to “DISABLE”.
e.Press the MENU button to confirm your selection and exit the programming option.
Testing the Alert
1.To test the alert function to ensure it is working, press the MENU button.
2.Press the UP "" or DOWN "" buttons until
3.Press the SELECT button to sound the alert siren.
4.Press the SELECT button again to silence the alarm.
www.jWIN.com