Jwin JX-M133 Operational Instructions, Obtaining Weather Channel/County Codes from NOAA

AM/FM/Weather band Radio w/ Dual Alarm Clock V10M10_IM_EN_06022009

OPERATIONAL INSTRUCTIONS

Obtaining Weather Channel/County Codes from NOAA

In order to receive alerts, JX-M133 must be set to the correct weather channel and county code(s) (FIPS code). To get this information for your area, call the NWS toll free number: 1-888-NWS-SAME(1-888-697-7263), or visit the website:

www.nws.noaa.gov/nwr/indexnw.htm

In the above website, search the state and county for your area and then write down the channel (frequency) and county code(s). You may want to obtain the codes for other areas through which you travel. JX-M133 can store up to 23 county codes (FIPS code) under the “Programming Multiple S.A.M.E County Codes” section on the next page.

Programming a Single S.A.M.E. County Code

1.Turn off the radio by pressing the POWER button on top of the radio.

2.Press the MENU button to open menu options.

3.Press the UP "" or DOWN "" buttons to scroll through menu options until “County Code” is displayed.

4.Press the SELECT button followed by the UP "" or DOWN "" buttons to scroll through ”SINGL COUNTY”, “MULTI COUNTY” or “ALL COUNTY”.

5.Choose “SINGL COUNTY”, followed by the SELECT button. ”Code 01” will be displayed and the first digit space will start blinking.

6.Use the UP "" or DOWN “” button to scroll through the digits 0-9. Input the first digit and press the RIGHT “>” button to save that selection and move

to the next digit.

7.Continue programming all 6 digits this way. When finished, press the SELECT button and your entered code will be saved.

Note: The single county code you set will automatically become the “CODE 01” of multiple county codes.

www.jWIN.com