1.8NEVER OPERATE THE BLENDER USING ATTACHMENTS NOT SOLD BY BLENDTEC

The use of any unauthorized attachments may cause fire, electric shock, and/or injury and will void the warranty.

1.9CONTAINER MUST BE PROPERLY IN PLACE WHILE APPLIANCE IS OPERATING

1.10BLADES ARE SHARP! HANDLE CAREFULLY!

1.11WHEN BLENDING HOT LIQUIDS, REMOVE CENTER PIECE OF LID

1.12POWER CORD PRECAUTIONS

NEVER operate with a damaged cord or plug. (If the supply cord is damaged it must be replaced by the manufacturer, or authorized service agent to avoid a hazard

DO NOT permit the cord to hang over the edge of the work surface.

NEVER use an extension cord with the unit.

Unplug the blender motor when not in use; before changing blender loca- tions; or cleaning.

1.13NEVER ATTEMPT TO REPAIR THE POWER UNIT

Never remove the blender motor cover. The blender motor does not contain self- adjustable or serviceable parts. A qualified service agent must make all service adjustments. Removing the cover or attempting to service the blender will void the warranty.

1.14 TURN THE POWER SWITCH OFF WHEN NOT IN USE

The Power Switch (ON/OFF switch) is located on the back of the blender motor cover.

1.15AVOID TOUCHING THE BLENDER DRIVE SOCKET AFTER EXTENSIVE USE.

The blender drive socket may become hot after numerous cycles.

1.16CLOSE SUPERVISION IS NECESSARY WHEN APPLIANCE IS USED BY OR NEAR CHILDREN.

1.17THE BLENDER IS INTENDED FOR HOME USE ONLY! ANY USE OF THE BLENDER FOR COMMERCIAL PURPOSES VOIDS ALL WARRANTIES.

SAVE THESE INSTRUCTIONS

HP-2

Page 5
Image 5
K-Tec HP3A instruction manual Never Attempt to Repair the Power Unit, Turn the Power Switch OFF When not in USE