![](/images/new-backgrounds/1291400/29140015x1.webp)
Standard Camera Bracket - Camera Mounting
Mounting your camera on the Standard Camera Bracket
To mount your camera, first select the appropriate slot in the bracket that will best locate the tripod mount- ing thread on your camera.You may need to reposition the camera knob. To remove the knob simply slide it along the slot to the end that has the threaded hole. Unscrew the knob out of the threaded hole, being careful not to crossthread. Replace the knob into the appropriate slot by reversing the procedure.The camera knob is a two piece design, with an inner and outer knob. Before installing the camera knob in the Standard Camera Bracket, turn the inner knob clock- wise into the outer knob until it won’t turn anymore. Next, install the knob into the appropriate slot then into the tripod mounting hole of your camera. Turn the inner knob into the camera until it bottoms out, then turn the outer knob clockwise until the camera is tight on the bracket.
The Standard Camera Bracket comes with two camera positioning aids.There is a flat camera shoe and a
Camera Knob
Camera Shoe
Camera Lug
Camera
Shoe
DiamondGrip | |
Adjustment Knob | Surface |
camera in the same location. Slide these adjusters into the best spot on your camera to ensure a square and secure mounting.
The Standard Camera Bracket also has an innovative DiamondGrip surface on the camera mounting side. This special friction surface will help to hold your camera's base securely to the bracket without slippage.
The
7