Kaidan manual KiWi Rotator Base, Tripod threaded bushing adapter, Inch Tripod

KiWi Rotator Base

Tripod threaded bushing adapter

The KiWi comes with a tripod adapt- er bushing which accommodates both 1/4-20 inch and 3/8-16 inch threaded tripod mounts.

1/4 inch Tripod

If your tripod has a 1/4 inch threaded mount, leave the brass bushing in the center hole in the bottom of the rota- tor as shown at lower left.

3/8 inch Tripod
If your tripod has 3/8 inch threaded	Adapter
mount, remove the brass bushing by	Bushing
unscrewing it in a counterclockwise
direction and screwing it into the
adjacent hole in a clockwise direction
using a coin (or large screwdriver) as
shown at lower right.
Use the spare outer hole to store the
brass bushing when you're using the
3/8 inch thread.That way, you won't
lose the bushing!

1/4-20 Thread with Bushing in cen-	3/8-16 Thread with Bushing in stor-
ter position	age position

5