7200

4.2 Error Messages

When an error has occurred in the ATB printer, an error message is displayed on the LCD panel. The error messages are listed in the table below.

Error Message

Error State

Recovery Procedure

 

 

 

WARNING:

Indicates a relatively minor error, ex.

Open the cover, take necessary actions for

 

when consumption articles (documents,

recovery, and close the cover.

 

etc.) has run short (paper-out), when the

If the error continues, contact a service

 

operator has made a mistake, etc.

technician.

 

 

 

PAPER JAM:

Indicates an error caused by the paper

Open the cover, remove the jammed

 

jam. The block where the paper jam has

coupon, and close the cover.

 

occurred is displayed.

 

 

 

 

COM.ERROR:

Indicates an error in communication with

Verify communication parameters. If the

 

the terminal.

error continues, contact a service

 

 

technician.

 

 

 

ENCODING

Indicates an error during magstripe

The error coupon is automatically ejected

ERROR:

encoding.

and voided.

 

 

Press the RESET key.

 

 

If the error continues, contact a service

 

 

technician.

 

 

 

MAGNETIC

Indicates an error during magstripe

Press the RESET key.

ERROR:

decoding.

If the error continues, contact a service

 

 

technician.

 

 

 

SYSTEM ERROR:

Indicates an error that seldom occurs

Power the printer off and on. If the error

 

under ordinary circumstances.

continues, contact a service technician.

 

 

 

OTHERS:

Indicates other errors such as AEA

Power the printer off and on. If the error

 

programming errors, etc.Indicates a

continues, contact a service technician.

 

relatively minor error. For example, end

 

 

of expendables (coupons) or operator

 

 

errors.

 

 

 

 

4-12

Operation Manual

Page 61
Image 61
AMT Datasouth 7200 manual Error Messages, Error Message Error State Recovery Procedure