Inserter, Output Stacker | AMT Datasouth 7200 manual

7200 APPENDIX

A.1.7 Inserter

(1)Document feeding direction

(2)Shutter

(3)Non-standard documents inserted

(4)Document feeding

(5)Documents rejected

A.1.8 Output Stacker

Face side up, leading side first in Not available

Passed back to the front inserter to be kept, or jammed in the carrier structure

The beep sound occurs when a document is fed normally

Passed to the output stacker

(1)	Capacity	100 documents
(2)	Document direction	Face side up, leading side first out
(3)	Full detection	Available

A.1.9 Transfer Ribbon Printing (Type D printers only)

(1) Near-end detection		Available; approximately 10 documents
		before end
(2)	End detection	Available
(3)	Breakage detection	Not available
(4)	Standardization	Refer to the transfer ribbon specifications
(5)	Life span	5,000 documents per roll (maximum, while
		multi-time printing)
(6)	Setting	Thermal transfer (TT)
(7)	Multi-time print	Four stages available, set on the front
		control panel

Operation Manual

APPENDIX-5

Image 70

AMT Datasouth 7200 manual Inserter, Output Stacker, Transfer Ribbon Printing Type D printers only

Contents

7200 Contents Is intentionally blank Introduction FCC Warning Product Safety Safety Considerations Operating Environment Location Space Required Power Line Conditions Connecting to Power Available Types Type Printing Method Number of Bins Viii Before Using the ATB Printer Checking the Package Names and Functions Names of Parts Functions Names Functions LCD Panel Functions Operator PanelLED Functions Operator Panel Layout Key Functions Online Test 7200 Operation Connecting the ATB Printer Connecting to a Wall Receptacle Connecting the Terminal Turning the Power On and Off CHECK-IN Ticketing Loading Documents into BINs 1 Loading the DocumentsKey cannot be removed in the Open position Document Orientation Visual 7200 Keep space for the documents Setting Documents in BINDo not remove the documents from the box Key cannot be removed Open position Close the side cover top right 7200 Loading Documents into the Inserter Installing the Transfer Ribbon TT Type D Only Pivots Lock Operation LCD Panel Display Changing Transfer Ribbons TT Type D OnlyFollowing operation is only for thermal transfer Treat used transfer ribbons as plastic waste 7200 Daily Maintenance Cleaning the ATB Printer Cleaning the Printer Surface Cleaning the Magnetic Head Cleaning card is optional sold separately Repeat the cleaning procedure several times as necessary Cleaning the Thermal Head Cleaning a Platen Roller Cleaning a Carrier Roller Inserter and Magnetic Blocks To Clean BIN Bin and Cutter Blocks Removing Paper Dust 7200 Troubleshooting Part Names Paper JamJam Locations and Corresponding Messages Unlock the cover before starting any procedure Jam Position Removing ProceduresRemoving the jammed coupon For a jam in BIN For a jam in BIN 3 Option After the jammed coupon has been cut If the jammed coupon has not been cut Side pressure roller Method varies depending on the location of the jammed coupon To remove the jammed coupon, go to step E Rear end of the jammed ticket is on the blade Troubleshooting Error Messages Error Message Error State Recovery Procedure Troubleshooting L O G I C a L Error M e s s a g e Error State Recovery Procedure 7200 Document Carrier Structure Appendix 1 SpecificationsDocument Carrier Structure Covers Side Covers Open/Closed Power Line Conditions Temperature and HumidityPower Connection Connecting to Power Bins and Feeder Encoding SpecificationsPrinting Output Stacker InserterTransfer Ribbon Printing Type D printers only Thermal Transfer Ribbon Printer AccessoriesAppendix 2 Consumables StoringTransfer Ribbons AMT Datasouth Corp