7200
1.2.2 Functions
No. | Names | Functions |
|
|
|
A | Operator panel | Houses the LEDs and keypad needed to operate |
|
| the ATB printer. |
|
|
|
B | Cover lock | Locks the side cover. (Use the key to open the |
|
| cover.) |
|
|
|
C | Inserter | Used to insert single coupons (one at a time). |
|
|
|
D | Output stacker | Receives ejected coupons, |
|
| capacity of 100 coupons.) |
|
|
|
E | Feed knobs | Used to remove jammed coupons. |
|
|
|
F | BIN 1, BIN 2, and BIN 3 | Used to load coupons into the feed rollers for |
| load knobs | each bin. |
|
|
|
G | BIN 1 | Used to hold coupons for printing. (BIN 1 has a |
|
| capacity of 500 coupons.) |
|
|
|
H | BIN 2 | Used to hold coupons for printing. (BIN 2 has a |
|
| capacity of 500 coupons.) |
|
|
|
I | Thermal head | Prints on the coupon. |
|
|
|
J | Interface connector | Used to connect the printer to a downline printer |
| (downline) | (reserved). |
|
|
|
K | Power switch | Turns the power on and off. |
|
|
|
L | Power connector | Used to connect the power cable. |
|
|
|
M | Interface connector (Host) | Used to connect the ATB printer to the terminal. |
|
|
|
N | BIN 3 | Used to insert coupons. (BIN 3 has a capacity of |
|
| 1000 coupons externally.) |
|
|
|
O | Thermal transfer | Holds used ribbon after thermal transfer printing |
| reel | (type D unit only). |
|
|
|
P | Thermal transfer supply | Supplies ribbon for thermal transfer printing (type |
| reel | D unit only). |
|
|
|
Operation Manual |
