7200
A.1.4 Bins and Feeder
This ATB printer has 2 internal bins and a third external bin as standard. Each of them can contain documents for printing. The specifications of each bin are as follows:
(1) Bins
B i n N o . | S t a n d a r d | I n t e r n a l | C a p a c i t y | D o c u m e n t T y p e s |
|
|
|
|
|
1 | ü | ü | 5 0 0 |
|
|
|
|
| I A T A R e s o l u t i o n |
2 | ü | ü | 5 0 0 | 1 7 2 0 a , 1 7 2 2 c , 7 2 2 c , 7 2 2 d , 7 2 2 e , |
|
|
|
| Continuous - fanfolds |
3 | ü |
| 1 0 0 0 |
|
|
|
|
|
|
(2)Document specifications Refer to the ATB Printer Document Specifications.
(3) | Detection | End detecting function available |
|
| |
(4) | Documents set | With or without a box; either available |
A.1.5 Encoding Specifications
(1)Magnetic encode method F2F (Two frequency coherent phase recording)
(2) | Track | 4 tracks |
(3) | Recording density | 210 BPI (All tracks) |
(4) | Coded character set | |
(5) | Data check method | Comparison check after written |
(6) | Coercive force | 325 ± 10% |
(7) | In case of encode error | The document with "VOID" printed is printed out. |
(8)Magnetic stripe specifications Refer to the ATB Printer Document Specifications
(9) Encoding areaRefer to Encoding Area figure in Maintenance manual
A.1.6 Printing
(1) | Printing method | Direct line thermal (1 |
|
| Thermal transfer (available; 1 |
(2) | Printing area | Refer to Printing Area figure in Maintenance manual |
(3) | Printing color | Black |
(4) | Horizontal: 203dpi (0.125mm/dot) | |
|
| Vertical: 203dpi (0.125mm/dot) |
Refer to "Transfer Ribbon Printing" for the transfer ribbon structure.
Operation Manual |