Kalorik JK 39380 manual Before The First Operation, Assembly page 5/24

Fax +1 305 430 9692

￿

Copies of the I/B. Please reproduce them without any changes except under special instruction from Team International USA. The pages must be reproduced and folded in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm height). When folding, make sure you keep the good numbering when you turn the pages of the I/B. Don’t change the page numbering. Keep the language integrity. Print only what is inside the frame.

BEFORE THE FIRST OPERATION

For the perfect taste, operate the cordless water kettle with fresh water in order to clean any residue left from the manufacturing process. When the appliance has cooled down, repeat the process 3 times with fresh water, before rinsing.

OPERATION

•Always remove the kettle from the power base (1) before filling it or before any operation.

•Open the lid (5) by pressing on the lid opening button (4) and fill the tank with fresh water, paying attention not to fill under the minimum mark or above the maximum mark indicated on the glass housing of the kettle (7).

•Close the lid by pressing it down until it you hear a click. Make sure it closes correctly.

•Make sure the spout filter is well in position, as else the auto-shut off feature might not work.

•Put the kettle onto the power base (1), plug into the wall socket, and switch on (2). The blue light ring (8) will come on, indicating that the appliance is operating. If it does not come on, check if the kettle is correctly positioned on the base and check if the base is plugged in. Do not open the lid while the water is heating or boiling.

•The cordless water kettle will switch off automatically when the water has boiled. However, you can stop the appliance anytime by putting the switch in off position or lifting the kettle from the power base.

CAUTION: Make sure that the lid is closed and the filter is correctly and securely fitted before switching on the appliance. Failure to do so will cause the kettle not to switch off.

•For instant re-boiling, wait until water has cooled down and switch on the appliance again.

•The kettle will not re-boil until the switch is pressed again.

•The kettle may be stored on the power base when not in use.

•Always disconnect the power supply when not in use.

5 JK 39380 - 131101

Assembly page 5/24