PROPER STORAGE
1.Turn the power switch to OFF and unplug power cord from electrical outlet.
2.Allow unit to cool completely(at least 30 minutes)
3.Remove the Fabric brush attachment from unit (if attached, please refer to following detaching steps)
A.Use your finger to push the back of the fabric brush to unlock it.(figure 21)
B.Gently slide the fabric brush off the sole plate.
CAUTION: Do not attempt to detach the brush if the iron plate is hot!!
Fig ure | 21 |
4.Push done on the wheel lock button to unlock wheels to allow the unit to move freely.
5.Drain any remaining water in water reservoir into a sink or tub by turning and removing the draining cap at back of the appliance, as shown in figure 22. Do not forget to put the draining cap in place after draining.
|
| Dra | in | Cap |
Fig | ure | 22 |
|
|
14 | USK SIT 25803 - 080425 |
