Figure 17
ATTACHING FABRIC BRUSH TO IRON
CAUTION: Use care when attaching fabric brush, as the sole plate may be hot. Do not attempt to attach fabric brush while appliance is emitting steam. As shown in figure 18 below, slide the fabric brush over the sole plate until it clicks in place. When the fabric brush is clipped in place you may begin steaming.
OPERATING THE IRONING STATION
1.NOTE: The very first time you use the ironing station, turn the steam output dial to maximum, press and lock the regular steam button and let the appliance run for 2 minutes on maximum. This is only required the very first time you use the ironing station. For subsequent use, it is not necessary to run the unit for 2 minutes, it can be used immediately. For the first hour of use, the ironing station may not perform at its optimum. This is due to the appliance needing time to settle. After the first hour, performance will improve.
11 | USK SIT 25803 - 080425 |
