Kambrook KCE340 manual ThermoGuard Overheating Safety Device, Safety Tip-Over Cut-OutSwitch

Safety Tip-Over Cut-Out Switch

There is a tip-over switch fitted to the base of the heater, if the heater is accidentally tipped over the heater will stop operating. Once the heater is placed back into an upright Position the heater will be in standby mode and the settings will need to be selected again.

ThermoGuard Overheating

Safety Device

Your heater is fitted with a safety device that switches off the heater in the event of overheating. Should this heater stop working, turn off the heater and inspect the air inlet and outlet for blockages. Wait until the unit is fully cooled for the protection system to rest before attempting to restart the heater.

If the heater fails to operate or the safety device switches off again. Return the heater to your nearest service centre for examination

or repair.

11

KCE340_IB_A12.indd 11 2/11/12 11:37 AM