Kambrook KCE340 manual Quick Start Guide, Turning the heater on, Setting the heating mode

Quick Start Guide

Turning the heater on

Plug the cord into a 230V or 240V power point and switch on.

Switch the heater ON using the main power ‘ON/OFF’ switch located at the base of the heater.

Press the ‘POWER’ button to activate heating. The heater will be in HIGH heat mode (2000W) and the current room temperature will appear on the LCD screen.

Setting the heating mode

Pressing the ‘MODE’ button	Pressing the ‘MODE’ button	Pressing the ‘MODE’ button
once will set the heater into	twice will set the heater into	three times will set the heater
AUTO mode. AUTO mode	FAN mode, and the LCD screen	into LOW heat mode (1000W).
allows you to adjust the	will display the current room
temperature settings to suit	temperature. FAN mode is for
the desired temperature.	fan-only operation with no
	output of heat.
Setting the variable temperature		Setting the oscillation

To use the variable temperature, press the ‘MODE’ button once to set the heater into AUTO mode.

Set the desired temperature by adjusting the ‘TEMPERATURE’

(+)to increase the temperature and (-) to decrease the temperature. The heater will now cut in and out to maintain desired set temperature.

Pressing the ‘SWING’ button will allow the heater to oscillate side to side. To stop the oscillation, press the ‘SWING’ button again.

8

KCE340_IB_A12.indd 8 2/11/12 11:37 AM