Setting the Variable
Temperature
The variable temperature can be used to maintain your desired temperature.
NOTE: The variable temperature only operates when the heater is being used in the Auto mode.
Press the MODE 
button until the heater is set to AUTO mode.
The LCD screen will display the default temperature of 25°C and will flash. When the temperature is flashing, you may set the desired temperature pressing the VARIABLE TEMPERATURE 
buttons on the control panel.
To adjust the set temperature press the 
VARIABLE TEMPERATURE button to increase the desired temperature or press the 
VARIABLE TEMPERATURE button to decrease the desired temperature.
The temperature can be set between 15° C and 35°C.
When the air temperature reaches
When the air temperature drops below the set temperature the unit will begin heating again.
Setting the Oscillation
The oscillation function works in all operating modes.
Press the POWER/SWING 
button once to activate the oscillation. The heater will begin to oscillate from side to side.
Press the POWER/SWING 
button again to stop the heater from oscillating.
Setting the Auto-Off Timer
The timer function works in all operating modes, and switches the unit off after a preset number of hours.
Press the TIMER 
button to activate the timer settings. A timer symbol 
will appear on the LCD screen displaying 1 hour.
Press the TIMER 
button to cycle through the one hour increments, up to 8 hours. The unit will then switch itself to standby mode after the selected number of hours has passed.
Safety Features
This heater includes an audible alarm to warn that parts of the heater are overheating. If the alarm sounds, immediately turn the heater off and inspect for any objects on or adjacent to the heater that may cause high temperature. DO NOT OPERATE THE HEATER WITH THE ALARM SOUNDING.
9
