5.Once base stand is aligned with the tower fan body, secure the base stand to the tower body with the four fastening screws (see Fig.4).
Fig. 4
6.Return the tower fan to its upright position; it is now ready for use.
Warning: Do not operate the tower fan without the base stand fitted.
Turning Your Tower Fan On
To turn the tower fan on, plug the power cord into a 230V or 240V electrical outlet and switch on. Be sure the plug fits tightly as a loose fit will cause overheating and damage the plug.
Once the power outlet is switched on, this will automatically allow the LED screen to display to current room temperature.
To start the tower fan, turn the tower fan on by pressing the ‘POWER’ button once; the unit will be in NORMAL fan mode.
Setting the Fan Speed
The tower fan has three fan speed settings; LOW , MEDIUM and HIGH .
Pressing the ‘SPEED’ button once will set the tower fan into LOW speed setting.
Pressing the ‘SPEED’ button twice will set the tower fan into Medium speed setting.
Pressing the ‘SPEED’ button three times will set the tower fan into HIGH speed setting.
NOTE: The SPEED indicator bar on the control panel will flash continuously during these cycles.
To turn the tower fan OFF, press the ‘POWER’ button and turn off at the power outlet and remove the plug from the power outlet.
9