Quick Start Guide
Turning the tower fan on
Plug the cord into a 230V or 240V power point and switch on.
Once the power outlet is switched on, this will automatically allow the LED screen to display to current room temperature.
To start the tower fan, turn the tower fan on by pressing the ‘POWER’ button once; the unit will be in NORMAL fan mode.
Setting the fan speed
Pressing the ‘SPEED’ button once will set the tower fan into LOW speed setting.
Pressing the ‘SPEED’ button twice will set the tower fan into MEDIUM speed setting. The speed indicator bar on the control panel will flash continuously on this cycle.
Pressing the ‘SPEED’ button three times will set the tower fan into HIGH speed setting. The speed indicator bar on the control panel will flash continuously on this cycle.
Setting the fan mode
Setting the osciillation
Once the tower fan is switched on and the the ‘POWER’button is selected; the unit will be in NORMAL fan mode.
Pressing the ‘MODE’ button once will set the tower fan into NATURE mode.
Pressing the ‘MODE’ button twice will set the tower fan into REDUCTION mode. To set the tower fan back to NORMAL mode, press the ‘MODE’ button again.
Pressing the ‘SWING’ button will allow the tower fan to oscillate side to side. To stop the oscillation, press the ‘SWING’ button again.
7