NOTE: When the NATURE mode setting is selected, the tower fan is programmed to self regulate through the various fan speeds. The NATURE mode is independent from the fan speed settings while the LED screen will still display the last selected fan speed setting.
NOTE: The tower fan is fitted with a power save mode. When the REDUCTION mode is selected or the TIMER function is set, the display panel will automatically switch off after 30 seconds. Press any key to turn the display on again.
Setting the Oscillation
This function will work in any mode. Pressing the ‘SWING’ button will allow the tower fan to oscillate back and forth. To stop the unit oscillating, press the ‘SWING’ button once more.
Setting the Auto-Off Timer
The timer function works in all operating modes, and switches the unit off after a
•Press the ‘TIMER’ button to activate the timer settings.
•Press the ‘TIMER’ button to cycle through the one hour increments, up to 12 hours.
•The tower fan will then switch itself to standby mode after the selected number of hours has passed.
•The TIMER can be set on any of the settings.
Using the Remote Control
Before using the remote control, remove the battery isolating slip by pulling the slip away from the remote control. The remote control buttons operate in the same way as those on the tower fan control panel. Your remote control includes 1 x CR2025 3V Lithium battery, and can be conveniently stored in the compartment on the top of the tower fan or at the rear housing
of the unit.
11