Using Your Kambrook Tower Fan continued
Setting the Nature and Reduction Mode
Your tower fan has a NATURE and REDUCTION setting.
Both the NATURE and REDUCTION modes can be used on any fan speed. The LED screen will indicate what mode the fan has been set in.
Nature Mode
The NATURE mode stimulates the natural rise and fall of the wind over time.
At any fan speed setting, pressing the MODE button once will turn the tower fan into NATURE mode.
To turn the NATURE mode OFF, press the MODE button twice, the fan will now be in NORMAL operation mode.
Reduction mode
The REDUCTION mode automatically decreases the fan speed over time.
The REDUCTION mode only applies in the MED or HIGH speed settings.
Once a fan speed setting is selected, press the MODE button twice will turn the tower fan into REDUCTION mode.
After 30 minutes, the selected setting will drop to the next lowest setting. For example if the fan speed is set at MEDIUM, after 30 minutes it will drop down to LOW until the unit is turned off.
To turn the REDUCTION mode off, press the MODE button once, the fan will now be in NORMAL operation mode.
When REDUCTION mode is selected the display panel will automatically switch off after 30 seconds. Press any button on the control panel to turn the display on again. This will NOT turn the tower fan off.
Diagram of speed cycle settings:
NATURE:
Random speed cycles
REDUCTION:
Speed steps down every 30 minutes for MED and HIGH
settings.
Speed (LOW,MED,HIGH)
speed
variation |
speed |
variation |
speed |
variation |
speed |
variation |
speed |
variation speed |
10