Using Your Micathermic Heater continued
2.As a general safety guide select a suitable location to wall mount the heater, approximately 0.5m from any furniture/furnishing either side of the unit and 2m from any furniture/furnishing placed in front of the heater. The heater must be mounted horizontally as per Fig 8.
Fig. 8
3.When selecting a location, make sure the base of the heater is at least 0.5m from the floor and at least 1.0m from the ceiling.
4.Measure out and mark the screw locations. Once you are confident that the screw locations are correct, drill suitable size holes.
5.Take care with inserting the screws into the holes you have made, and then mount the heater onto the wall bracket.
6.Once the heater is mounted on the wall, lodge the heater to the mounting bracket to prevent the heater from being accidently dislodged from the mounting bracket.
7.Visually inspect the front panel to ensure no foreign material is blocking this area.
CAUTION: Do not mount the heater below curtains and/or other flammable items.
Turning Your Heater On
Turn the heat setting dial to the OFF position. Make sure that the switch on the THERMOSTAT dial is set to MIN.
Plug the cord into a 230V or 240V power point and switch on.
NOTE: To avoid an electrical circuit overload, it is recommended that no other appliances are plugged into the same circuit as your heater, when it is in use.
10
KMH100_IB_A11_FA.indd 10 | 14/09/11 1:58 PM |
