Kambrook KMH100 manual Setting The Heating Mode, Setting The Variable Thermostat

Setting The Heating Mode

Fig. 9

To activate the heater, turn the heat setting dial clockwise to the LOW or HI setting. The heater will start operating on the selected heat setting and the red power indicator light will illuminate. Use the heat setting dial to select the desired heat setting.

LOW – Low heat setting (1000 watts) HI – High heat setting (1500 watts)

Turn the heat setting dial to the OFF position to stop the heater operating.

NOTE: This heater features a tip-over switch. If the heater tips over, it will automatically switch off. Once placed back into the upright position, the heater will resume operation.

NOTE: You may notice a faint smell and light crackle sound when using the mica heater for the first time. This is normal and nothing to worry about. Continue running the mica heater, the smell will dissipates.

Setting The Variable

Thermostat

The variable THERMOSTAT can be used to maintain your desired temperature.

Turn the variable THERMOSTAT dial to the MAX setting. Once a comfortable room temperature has been reached, slowly turn the variable THERMOSTAT dial anti-clockwise until a click sound is heard.

At this setting your heater will automatically cycle on and off to maintain the desired room temperature.

Fig. 10

To adjust the set temperature turn the variable THERMOSTAT dial clockwise to increase the desired temperature and anti-clockwise to decrease the desired temperature.

11

KMH100_IB_A11_FA.indd 11 14/09/11 1:58 PM