Using Your Micathermic Heater
Before First Use
Remove any promotional material or packaging from the heater.
When unpacking the heater, check to see you have received the wheels and wall mounting packs, before discarding the packaging.
Unwind the cord to its full length and place the heater on a firm, level surface in a stable upright position. Visually inspect the air inlet and outlets to ensure there are no blockages.
Securing The Heater Wheels
2.Line up the screw in the wheels with those in the base of the brackets, and secure.
Fig. 3
The heater has four wheels and two wheel brackets that come with a set of screws. The wheel screws are located in the wheel pack.
3.Turn the heater upside down. Place the plastic wheel brackets onto the two perforations, located at the base of the heater. Ensure the bracket with the centre hole (near the centre screw) is placed on the right hand side of the heater.
Fig. 1 |
| |
1. Insert the screw into the wheel, |
| |
ensuring the flat end of the screw | Fig. 4 | |
sits between the wheels. | ||
|
Fig. 2
8
KMH100_IB_A11_FA.indd 8 | 14/09/11 1:58 PM |
