Kambrook KSB8 manual To Detach the Stainless Steel Blending Shaft

NOTE: When pressing and holding the ‘VARIABLE’ button the blender will operate at the speed selected by the Variable Speed Control. When using the ‘BOOST’ button the blender will always operate at maximum speed operation. The ‘BOOST’ button can be used at any time.

To Detach the Stainless Steel Blending Shaft

Ensure the Stick Mixer is turned off, the power is switched off at the power outlet and the appliance is unplugged.

Hold the motor body with one hand, (Fig 3) whilst holding the blending shaft in the other hand and turn the blending shaft in a clockwise direction. Pull the motor body away from the blending shaft to detach.

Fig. 3

NOTE: The Stick Mixer has a Variable Speed Control. To decrease speed turn the dial anti-clockwise and to increase speed turn the dial clockwise (See Fig 4).

The Stick Mixer motor will only operate while the ‘VARIABLE’ or ‘BOOST’ button remain depressed – this is a safety feature.

Fig. 4

Recommendations when Using the Stick Mixer as a Hand Blender

•The Stick Mixer blends foods and liquids rapidly, therefore it is easy to over-process. Remember when using the blending shaft, to stop the Stick Mixer and check food throughout the operation.

•The stainless steel blending shaft on the Stick Mixer allows for hot food to be processed directly in the saucepan. This makes blending soups and sauces very easy.

•For safety reasons move the saucepan away from the heat before processing.

•Ensure the body of the appliance and power cord are kept away from any heat source.

•When pureeing and blending, cut food into uniform sizes. This will ensure smooth and consistent results.

•Warm all liquids to be added to soups and purees, this will ensure even blending.

9