Operating Your Kambrook Power Drive Stick Mixer continued
•Place the jug on a damp cloth during blending. This will keep the jug stable.
•Do not operate the appliance continuously for more than 1 minute. Allow the motor to rest for 1 minute between each use.
If food becomes lodged around the processing blade or in the blade guard, follow the following safety instructions:
1.Release the ‘VARIABLE’ or ‘BOOST’ button, switch the power off at the power outlet and unplug the cord.
2.Use a spatula to carefully dislodge the food. Do not use fingers as the blades are sharp.
3.After the food has been removed and blades are clear, plug the appliance back into the power supply, switch the power on and continue blending.
To Attach the Chopping
Blade, Chopping Bowl
and Lid
Remove blending shaft from motor body as per Page 9.
NOTE: The chopping blade is extremely sharp and should be handled only by the upper plastic section.
Place the blade onto the metal pivot pin in the base of the chopper bowl (See Fig 5). Place the food inside the chopper bowl. Do not exceed the maximum (MAX) marking.
Fig. 5
Place the lid onto the chopper bowl and turn the lid in clockwise direction until the lid clicks and locks onto the chopper bowl (See Fig 6).
Fig. 6
10
