Operating Your QuikSnaks Toastie Maker
Before First Use
Remove and safely discard any packaging material and promotional labels before using the appliance for the first time.
Check that the cooking plates are clean and free of dust. If necessary, wipe over with a damp cloth. Place the Toastie Maker on a flat, level surface with the lid in the closed position.
When using the Toastie Maker for the first time you may notice a fine smoke haze. This is caused by the heating of some of the components. There is no need for concern.
To Use the Toastie Maker
1.Insert the plug into a 230V or
240V power outlet and turn the power on. The red ‘POWER’ light will illuminate.
2.Allow the Toastie Maker to preheat until the green ‘READY’ light illuminates.
3.During this time, prepare the sandwich by setting aside four slices of bread and prepare filling.
4.Place two slices of bread on the plates. Place filling on top
of bread.
5.Place remaining bread on filling. The green ‘READY’ light will cycle on and off during the toasting process indicating that the correct temperature is being maintained.
6.Carefully close the lid and clip handles together. Do not force the lid to close.
7.Toasting should take approximately four minutes. Exact toasting time will be a matter of taste. It will also depend on the type of bread and type of filling used.
8.When the sandwich is cooked, remove it with the help of a plastic heat resistant or wooden spatula. Never use metal tongs or a knife as these can cause damage to the
9.To maintain heat, keep the lid closed until you are ready to toast the next sandwich.
NOTE: Always allow the Toastie Maker to
WARNING: The cooking plates are hot. Do not touch during use or when still hot after use.
Healthy Snacks
Due to the
7