Kambrook KSS70 Steam Boost On Demand, Vertical Steam Ironing

11
M
I
N
S
T
E
A
M
M
A
X
POWER
M
I
N
S
T
E
A
M
M
A
X
POWER
NOTE: As the steam pump is
getting up to temperature,
it may emit some noise. This
will grow quieter as the steam
comes through. If the water tank
runs out of water, the pump will
start to get noisy.
Steam Boost On Demand
• Steam can be used to help
remove stubborn creases while
ironing. To activate Steam Boost,
ensure the Thermostat Control
is set to an appropriate setting
to produce steam, then press
down at the front of the Steam
Control Button and hold as
long as required.
Steam will emit as long the Steam
Control Button is pressed down
and will stop when released.
Vertical Steam Ironing
• To vertical steam iron, ensure
there is water in the water tank
and turn the Thermostat Control
on the iron to the MAX position.
Set the Variable Steam Control
Dial to the desired setting for the
amount of steam required.
• Hang the garment from a hanger
and stretch the fabric slightly with
one hand checking that there
is nothing behind the fabric that
can be damaged by the steam.
• Hold the iron close to, but not
touching the fabric. Hold the iron
well away from delicate fabrics
and use a low steam setting.
wARNINg: Steam will
not be produced for
steam ironing if the
temperature on the
Thermostat Control is
not set to the area
marked STEAM and the
Steam Control Button is
not pressed.
wARNINg: As the steam
produced is very hot,
never iron or steam iron a
garment while it is bein g
worn; always hang the
garment on a hanger.
• With the iron held vertically
and tilted slightly forwards,
press intermittently on the
Steam Control Button while
moving it from the top of the
garment to the bottom.
NOTE: If using starch, spray it
onto the opposite side of the
garment to the side you are
steam ironing.
Fig. 2