Using Your Kambrook Jaguar Vacuum Cleaner
Remove all packaging from the unit, hose and other accessories; ensure that you have removed all of the accessories before discarding the packaging.
Ensure that the dust bag and filters are correctly fitted.
Locate the crush proof hose and push the connection point into the hose inlet connection on the top of the unit, until a “click” sound is heard.
KVC11,12,15 only.
Connect the wands together by placing the narrower end inside the wider end of the other wand and push together firmly.
Model KVC16 only features a telescopic adjustable height wand.To extend the wand push the extension lever in the direction of the arrow (printed on the lever) and pull out the narrower tube to the desired height.
Connect the wide end of the connected wands (or telescopic tube [KVC16]) on to the hose end, and push together firmly.
Fit the floor head to the narrow end of the wand/s and push together firmly.
Fully extend the power cord by pulling the power plug (situated at the rear of the unit) out from the unit, until the yellow tape on the cord is shown.
ENSURE THAT YOU DO NOT OVER EXTEND THE POWER CORD - DO NOT EXTEND PAST
THE RED WARNING TAPE ON THE
CORD
Plug into a 230/240v power point and switch the power on.
To commence vacuuming push down on the on/off foot pedal, at the top, rear of the unit 
.
For full suction power ensure that the fingertip suction control cover (on the hose handle) is closed.
Variable Power Control (models KVC15 and 16 only)
The variable power control slide switch is located on the top of vacuum. Slide the control to the ‘MAX’ position for vacuuming hard floors and carpet surfaces and to ‘MIN’ position when using the accessory tools.
When vacuuming is complete, push down on the ‘on/off’ pedal to switch off.
Turn the power off at the outlet and then remove the power cord from the power outlet (when removing plug from the power outlet grasp the plug not the cord).
To retract the cord push down on the ‘cord rewind’ pedal.
IMPORTANT: HOLD THE PLUG END WHEN RETRACTING THE CORD TO PREVENT IT FROM STRIKING YOU OR THE VACUUM.
ALWAYS ENSURE THAT THE DUST BAG AND THE MOTOR PROTECTION FILTER ARE CORRECTLY FITTED. NEVER OPERATE WITHOUT THE DUST BAG OR FILTERS IN PLACE.
5
